Bosch HSS Twist Drill Bit PointTeQ 25pcs ProBox

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is manufactured to DIN 338. The drill bit is Type N (flute angle) with a tip of 135 degrees. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.

  • Fast Drilling in Metal
  • HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design
  • Self-centering tip prevents wandering, making quick and easy drilling starts possible
  • Increased drilling rate generates less heat and wear
  • PointTeQ tip design remains sharp and ensures continuous durability

£22.86 per Each
In stock
Product code
08994
Stock availability ()
  • MILTON KEYNES: 2

Buying in bulk - Get a custom quote

More Information
More Information
ManufacturerBosch
Type of drill bitTwist
Type of accessoryDrill bit
Diameter (mm)1.5, 10.5, 11.5, 2.5, 3.5, 4.5, 5.5, 6.5, 7.5, 8.5, 9.5, 1, 10, 11, 12, 13, 2, 3, 4, 5, 6, 7, 8, 9, 12.5
EAN3165140917704
MPN2 608 577 352
Delivery Information

Christmas delivery information: To secure pre-Christmas delivery, please order any stocked products by midnight Tuesday 14th December. For information on products delivered direct from a supplier, please get in touch.

Delivery for branch stocked items is currently 2-5 working days and items will be transferred nationally across branch. However, Click & Collect is only available from eligible branches that have all items on your order in stock.

You will be contacted to confirm delivery/collection dates from your local branch.

Items delivered directly from a supplier are subject to specific lead times detailed on the product image.

 
Please note: If you're ordering multiple items, these may arrive on separate deliveries. Lead times may vary for items delivered direct from one of our trusted suppliers. Whilst assistance in offloading materials is appreciated this is conducted at the customer's own risk. For more information about deliveries from Timberworld, please visit our delivery details page
 

Do we deliver to you?

Please use our interactive map below to see if we deliver to your postcode. If your postcode isn't covered on the map, please get in touch and we will see what we can do!
 

Metric/Imperial Conversions

Measurements

1 metre (1m) is approximately 3ft 3in (39.37in). 1 inch when converted to metric is 25.4mm.

However, when purchasing timber, you will find that there is usually a slight difference between the actual conversion measurement and the measurement used, for example, items measuring 1 inch may be sold as 25mm. Because the industry conversion is fractionally different than the actual imperial conversion, you should always measure in metric (mm, cm, m) to avoid any measurement mistakes.

 

Imperial (inches) Actual (mm) Conversion (mm)
1 25.4 25
2 50.8 50
3 76.2 75
4 101.6 100
5 127 125
6 152.4 150
7 177.8 175
8 203.2 200
9 228.6 225
10 254.0 250
11 279.4 275
12 304.8 300
24 (2ft) 609.6 600
36 (3ft) 914.4 900
48 (4ft) 1219.2 1200
60 (5ft) 1524.0 1500
72 (6ft) 1828.8 1800
84 (7ft) 2133.6 2100
96 (8ft) 2438.4 2400